5 Troubleshooting Tips for a Samsung Dryer Not Spinning

Owning a Samsung dryer brings with it a number of advantages, but nothing is immune to occasional issues. One such problem that can cause a significant interruption to your daily routine is your dryer not spinning. Thankfully, there are ways to fix this. Let’s delve into the top five tips to troubleshoot your Samsung dryer when it’s not spinning.

1. Check the Drive Belt

When your Samsung dryer is humming but not spinning, the most common culprit is the drive belt. This belt wraps around the dryer drum, idler pulley, and motor pulley. Over time, it can wear out or break, causing the drum not to turn.

To inspect the drive belt, you’ll need to disassemble your dryer. Be sure to disconnect the dryer from its power source before beginning. Once the dryer is open, look for signs of wear or damage on the belt. If it’s broken or worn out, it will need to be replaced.

2. Inspect the Drum Rollers

If your Samsung dryer’s drum is hard to turn by hand, or if it’s not spinning at all, the drum rollers might be worn out. These rollers help the drum to spin smoothly, but they can wear out over time.

Just like with the drive belt, you’ll need to disassemble your dryer to inspect the drum rollers. If you see any signs of wear or damage, you should replace the rollers.

3. Test the Motor

Your Samsung dryer’s motor could be the reason why your dryer is heating but not spinning. If the motor is defective, it may run briefly but will not have the power to continue running.

To check the motor, you can manually try to turn the drum from the inside. If the drum spins easily, then the motor is likely not the problem. If it doesn’t spin easily, you’ll need to investigate further or consider calling a professional.

4. Check the Door Switch

Your Samsung dryer will not start if the door switch is not working properly. This is a safety feature to prevent the dryer from running while the door is open.

You can check the door switch with a multimeter to see if it has continuity. If it doesn’t, you’ll need to replace the door switch.

5. Review the Idler Pulley

The idler pulley provides the necessary tension on the drive belt, allowing it to turn the drum. If your Samsung dryer drum won’t turn, a worn-out idler pulley could be the cause.

Just like with the drive belt and drum rollers, you’ll need to disassemble the dryer to inspect the idler pulley. If it looks worn out or doesn’t move freely, it will need to be replaced.

5 Troubleshooting Tips for a Samsung Dryer Not Spinning scheme

As you can see, troubleshooting a Samsung dryer that’s not spinning involves inspecting several different parts. If you’re unsure about any of the steps, don’t hesitate to reach out to a professional. In the Nashville area, NashFix is a reliable appliance repair company with experience in fixing a wide range of dryer issues.

Dryer Repair Nashville

If you’re looking for more home maintenance tips, NashFix offers a wealth of knowledge on their blog. From a comprehensive guide to troubleshooting KitchenAid dishwasher cleaning problems to the ultimate guide to cleaning your ice maker, you’ll find a wide variety of helpful articles.

If you need further guidance on whether to fix or replace an appliance, check out their post on Is it Worth it to Fix an Appliance?

For those located in Nashville or the surrounding areas, don’t forget that you can schedule an appointment with NashFix for expert assistance.


Frequently Asked Questions

Why does my Samsung dryer turn on but not spin?

If your Samsung dryer turns on but does not spin, it may be due to a broken drive belt, worn out drum rollers, a defective motor, a malfunctioning door switch, or a faulty idler pulley.

Why does my dryer run but not spin?

A dryer may run but not spin due to issues with the drive belt, drum rollers, motor, door switch, or idler pulley.

How do I reset my Samsung dryer?

To reset your Samsung dryer, unplug it from its power source, wait about 10 minutes, and then plug it back in.

Why won't my Samsung washer spin?

A Samsung washer might not spin due to a problem with the lid switch, motor coupling, or drive belt.

How do I get my Samsung dryer to spin only?

To get your Samsung dryer to spin only, use the “Air Fluff” or “Tumble” setting.

How do I know if my dryer belt is broken?

You can tell if your dryer belt is broken by visually inspecting it. Signs of a broken belt include cracks, thin spots, or a belt that is split in half.

Is it easy to replace a dryer belt?

While replacing a dryer belt is not overly complex, it does require disassembling the dryer, which can be difficult for individuals not experienced in appliance repair.

How much does it cost to replace dryer belt?

The cost to replace a dryer belt can vary depending on your area and the service fee of the technician. The belt itself is not typically expensive.

How long does Samsung dryer last?

On average, a Samsung dryer can last around 10 to 13 years with proper maintenance and use.

How long does it take to reset a Samsung dryer?

It typically takes about 10 minutes to reset a Samsung dryer.

Do dryers have a reset button?

Most dryers do not have a reset button. However, you can “reset” a dryer by unplugging it, waiting a few minutes, and then plugging it back in.

These are just a few of the common questions related to a Samsung dryer not spinning. For more in-depth assistance and professional service, consider reaching out to a local appliance repair service such as NashFix in the Nashville area.


Appliance Repair Nashville

If there’s something wrong with your appliance or if it’s not working like it should be, if you need an appliance repair near you in Nashville TN and the surrounding areas – call us or text us at Appliance Repair Company NashFix today:
☎ (615)-502-2255 or you can
book an appointment online.

ALSO SERVING:

Antioch, Arrington, Brentwood, College Grove, Columbia, Franklin, Gallatin, Goodlettsville, Hendersonville, Hermitage, La Vergne, Lebanon, Mount Juliet, Murfreesboro, Nashville, Nolensville, Smyrna, Spring Hill, Thompson’s Station.